Boost your wireless connection by performing the easy Linksys range extender setup and unblock the dead zones of your home. Linksys extender setup using WPS button or manually configuring your range extender can be completed within a few minutes. Call us to learn more!

Boost Wi-Fi: Linksys Extender Setup Process

A Wi-Fi Range extender is the thing that you need to support your remote network and enhance it for the slack free wireless network system. On the off chance that you begin seeing connection drops and in various areas of your home or experience no network at all in some areas, you may like to introduce a remote repeater to control the issue.

The Linksys Wireless Range Extender permits you to expand a remote signal from any Wi-Fi router or passage for Linksys Extender Setup. You can utilize the Linksys Wi-Fi extender when it is hard for the Wi-Fi signal to reach at each side of the structure. To make another subsequent network, it takes the current signal from the remote passageway and rebroadcasts it. You can utilize the Wi-Fi extender when you have a Wi-Fi extender and the signal does not arrive at certain spaces. The area that doesn’t get signals from the router is called Dead Spots. You can arrange a Wi-Fi extender at the midpoint area to get the signal even in dead spots. At home, associations, and government network stations, the Linksys Wi-Fi extender can be utilized. To know more about the Linksys Wireless Range Extender we are here taking an example of Linksys RE7000 Max-Stream AC1900+, Wi-Fi Range Extender. Peruse more to discover how to set up a Linksys Wi-Fi extender. 

Features of Linksys Wireless Range Extender?

Your Linksys range extender or repeater can easily allow you to extend your Wi-Fi coverage to the areas that are hard to reach such as backyard or garage. The wireless repeater lets you repeat the wireless signal through wireless or wired connections. Taking here an example of a compactly designed Linksys RE7000 Max-Stream AC1900+ Wi-Fi Extender, the extender helps in eliminating the dead zones and boosts the Wi-Fi throughout your house. Some of the excellent features of the Linksys RE7000 extender are as follow:

  • Advanced wireless AC technology for streaming and gaming simultaneously on several devices
  • Allows its users to expand the coverage up to 2500 square feet and killing the dead zones of your house
  • Linksys wireless range extender enables the device to connect invariably switch to the strongest Wi-Fi signal
  • The range extender is an easy to use range extender and the Linksys range extender setup can be done effortlessly

How to manually configure your Linksys wireless- N Range Extender?

To manually configure the Linksys wireless range extender, follow the given steps. But, before starting ensure to do the following:

  • Pinpoint the router’s wireless settings such as:
  • SSID
  • Wireless channel
  • Wireless password 
  • Now, reset the range extender by pressing and holding the restart button for 5 seconds located at the top panel. 

Once the LED starts blinking to restore your extender to its factory default setting, the resetting process is completed. Further, to manually configure or Set up Linksys RE7000 extender, follow the steps given below:

  • Now, connect your PC to the Ethernet port of your extender using an Ethernet cable
  • Fit your range extender to the power outlet and ensure that the LED lights are stable 
  • Next, open a web browser and fill in your router’s IP address or 192.168.1.1 in the browser’s URL bar. 
  • Enter the default Password and Username and hit the “LogIn” option
  • Once logged in, click on Wireless and then Basic Wireless settings option
  • Ensure that the configuration view is set to Manual 
  • Next, on the wireless Security dialogue box, choose the security setting that matches your device’s configuration and then fill in the password
  • To apply your settings click on Save Settings option
  • Lastly, unplug the power cables of the router and range extender for approx. 30 seconds. First plug in your router and wait for the lights to be stable and then plug in your Linksys range extender.

Pro Tip: to check that your extender is successfully installed you need to access the router’s DHCP table and verify that your range extender is listed with the IP address. 

How to perform Linksys RE7000 extender setup using WPS button?
To perform Linksys WPS setup you need to encounter following steps:
  • Plug your Linksys RE7000 into a wall outlet close to your router
  • Once done wait for the LED to turn amber in color
  • Now, press the WPS button located on the side panel of your extender
  • Once pressed the indicator LED will blink green
  • Now wait for the front LED to turn solid green 

In case if you need to extend your network repeat the step second and fourth again. The Linksys RE7000 setup using WPS button is completed. 

linksys extender setup
How to set up your Linksys range extender in Access Point mode?
The Linksys Range Extenders can be designed to work in Access Point mode as well.

This chosen mode lets your reach extender grow your Wi-Fi by interfacing with your router through a link, which empowers it to have negligible loss of execution or dropping network. For better Wi-Fi speeds, pick Access Point mode. Before you start the setup interaction, make sure to do the accompanying: 

  • A dynamic Wi-Fi association.
  • Your Wi-Fi name and Wi-Fi security key. 
  • An Ethernet link sufficiently long to associate your router to your reach extender. 

Once done, follow the means beneath and the model beneath used is a Linksys RE6700.

  • First plug the extender to a power outlet and wait till the light starts blinking orange
  • Now connect an Ethernet cable from your router to the range extender
  • Connect your computer to the SSID of your range extender
  • On a web browser enter http://extender.linksys.com in the URL.
  • Click on “Start Setup” option
  • Click on the “Next” option under the option of “as a Wired range extender” (access point)
  • Now, create a extended network that your Linksys range extender will broadcast and click on “next”
  • Choose or create an admin password for Linksys extender and then click on “save”
  • Your screen can be prompted to register your Linksys product to receive notifications regarding updates. 
  • Then, fill in your email address and click on next

Following this, your Linksys RE6700 is set up as an access mode. 

How to set up Linksys RE7000 to Range Extender mode?

Apart from Access mode, your Linksys range extender can be set up in range extender mode as well.

To perform Linksys extender setup to range extender mode follow the steps given below:

  • First plug the extender to a power outlet and wait till the light starts blinking orange
  • Now connect an Ethernet cable from your router to the range extender
  • Connect your computer to the SSID of your range extender
  • On a web browser enter http://extender.linksys.com or 192.168.1.1 in the URL.
  • Click on “Start Setup” option
  • Now, create an admin password and password hint and save 
  • Choose “as a Wireless range extender” option
  • Choose your existing Wi-Fi and fill in the password when asked
  • Now, create an extended network SSIDs and wireless password
  • When on range extender mode the spot finder page will appear which determines the signal strength between your router and extender. 
  • Now, your device will check for any latest available firmware and will upgrade it

Perusing the steps above, your Linksys RE7000 is set up in Range Extender mode and once done the top header will be read as Dual Band Wireless Range Extender. If you are still facing error with your Linksys device, Drop your query in chat box or contact experts.